The venturi wet scrubber models are used for the separation of substances that cannot normally be separated or are difficult to separate in dry operating systems. Our high-performance separators inject water into the airflow as the basic concept of the venturi principle. These multipurpose units can be utilized in almost all sectors of industry.
The purpose of the Venturi wet scrubber series is the extraction, absorbtion and separation of source emissions that cannot normally be captured or are difficult to capture with dry operating systems. This type of extraction technology is best suited for sticky, wet particulate and gaseous pollutants.
Wet scrubbers operate on the Venturi principle and are utilized in most industry sectors and metalworking applications such as polishing and grinding. Venturi wet separator extraction systems are also known as wet scrubbers or gas scrubbers.
During the extraction process an effluent gas stream is saturated with liquid in order to absorb any contaminants such as particulate, waste liquids or gases. Usually, fresh water is used for the scrubbing process.
VDN wet scrubbers are used in the absorption and scrubbing of vapors or particulate waste that either can‘t normally be separated or are difficult to separate in dry operating systems.
The degree of separation is often higher with dry separators, but for combustible, moist or adhesive emissions, such as those generated during polishing or blasting, wet separation and discharge is the safer and more reliable option.
We offer five models with a variety of waste disposal systems.
There are five models with different types of disposal. Air flows from 2,500 m3/h up to 56,000 m3/h can be separated with the various models.
Would you like to get further information or do you have a certain request? Please do not hesitate to get in touch with us - our experts will come back to you as soon as possible!